EV Charger Station
-
40KW UR100040-LQ Liquid Cooling DC Charging Module For DC Charger Station
- Model No.:UR100040-LQ
- Input Voltage:Rated voltage 380Vac, three phase (no center line), operating range 274-487Vac
- Rated Output Power:30kW
- Output Voltage Range:50-1000VDC
- Peak Efficiency:≥ 96%
- Power Factor:≥0.99
- Current Regulation Accuracy:≤±1%
- Communication Protocol:CAN
-
30KW EV Charger Power Module Used For CCS2 And CHAdeMO EV Charger Station
- Model No.:MD100030FEU
- Input Voltage:Rated voltage 380Vac, three phase (no center line), operating range 274-487Vac
- Rated Output Power:30kW
- Output Voltage Range:50-1000VDC
- Peak Efficiency:≥ 96%
- Power Factor:≥0.99
- Current Regulation Accuracy:≤±1%
- Communication Protocol:CAN
-
20KW Air Cooled EV Fast Charger Module For DC Charger Station
-
- Model No.:MD100020FEU
- Input Voltage:Rated voltage 380Vac, three phase (no center line), operating range 274-487Vac
- Rated Output Power:20kW
- Output Voltage Range:50-1000VDC
- Peak Efficiency:≥ 96%
- Power Factor:≥0.99
- Current Regulation Accuracy:≤±1%
- Communication Protocol:CAN
-
-
30kw AC DC Power Module UXR100030B EMC Class B EV Charging Module
- Model No.:UXR100030B
- Input Voltage:Rated voltage 380Vac, three phase (no center line), operating range 274-487Vac
- Rated Output Power:30kW
- Output Voltage Range:50-1000VDC
- Peak Efficiency:≥ 96%
- Power Factor:≥0.99
- Current Regulation Accuracy:≤±1%
- Communication Protocol:CAN
-
32A 7KW Type 1 WallBox EV Charging Station with Wifi APP
Product Name:32A 7KW Type 1 WallBox EV Charging Station with Wifi APP
-
15KW EV charger module used for CCS2 and CHAdeMO EV charger
15KW 750V Charger Power Module:Main Feature:*Inside high frequency transformer isolation*Full hot plug design*High efficiency over the full load range, full load efficiency higher than 95.5%*Wide output voltage range, 150-750Vdc, suitable for a wide range of EVs*Constant current for higher output power at low output voltage*An internal patented intelligent discharge circuit automatically discharges residual charge, simplifying system designs*Low standby power consumption, less than 9W*3 Phase without neutral elinates the risk of high neutral currents*3 Phase active power factor correction technology, reduces the harmonic interference to the grid* Dual DSP design, provides the full digital control, less componets means higher reliability*Wide input voltage range, 260-530Vac, allows oparation in most poor grid conditions*Wide operating temperature range, -40°C~+75°C -
30KW High Efficiency DC Fast Charging Station Use EV Charger Power Module
OverviewQuick Details- Place of Origin:
-
China
- Model Number:
-
DCM1000100
- Type:
-
DC/AC Inverters
- Output Type:
-
TRIPLE, Multiple
- Output Current:
-
60A
- Output Frequency:
-
50/60Hz
- Size:
-
455*300*94MM(D*W*H)
- Weight:
-
17KG
- Certificate:
-
CE
- Product name:
-
30kW Power Module
- Power Supply:
-
3P+PE
- Rated Voltage:
-
260~470V AC
- Max. Input Current:
-
60A
- Input Frequency:
-
50/60Hz
- Standby Power:
-
<8W
- Rated Power:
-
30kW
- Enclosure:
-
Aluminized Zinc plate (SGLCC)
- LED Indicator:
-
Green/Yellow/Red
- Configuration:
-
Manual/Auto
-
20kW High Efficiency Electric Vehicle DC Fast Charging Station Use EV Charger Power Module
OverviewQuick Details- Place of Origin:
-
China
- Model Number:
-
DCM1000100
- Type:
-
DC/AC Inverters
- Output Type:
-
TRIPLE, Multiple
- Output Current:
-
60A
- Output Frequency:
-
50/60Hz
- Size:
-
455*300*94MM(D*W*H)
- Weight:
-
17KG
- Certificate:
-
CE
- Product name:
-
30kW Power Module
- Power Supply:
-
3P+PE
- Rated Voltage:
-
260~470V AC
- Max. Input Current:
-
60A
- Input Frequency:
-
50/60Hz
- Standby Power:
-
<8W
- Rated Power:
-
30kW
- Enclosure:
-
Aluminized Zinc plate (SGLCC)
- LED Indicator:
-
Green/Yellow/Red
- Configuration:
-
Manual/Auto
-
ev portable charger 15 kw ev dc fast charger ccs chademo ev charger
Fast, mobile & flexibleMobile charging with up to 200 Km/h!The CHR-30 quick-charger was developed for electric vehicleswith CHAdeMO or ccs Cormbo DC charging sockets and is designed for semi-mobile use.It is compatible with all popularindustrial sockets and can be used with CEE63 plug sockets.The charger is flexible in use thanks to its compact dimensions and is especially suitable for use with vehicle pools,inFunction and Features for 15KW portable EV charger
1)The communication board has the high-speed CAN net work can communicate with BMS of the electric car and complete the charger charge control.It used to judge the power battery type of the electric car and obtains the systematic parameter and also obtains the status data of the power battery’s voltage,current and temperature in the course of charging and before charging.
2)4.3 inches LCD touch screen display with indicator function,which can real-time display the remaining battery power,charging voltage charging
Product Description
Working condition of 15kw portable dc charger:
1) Prevent the rain, water, avoid direct sunlight ,away from the sources of charger,such us fire
source, combustible gas,rain,snow smoke,sand-dust, ect.
2) Operating temperature:-20℃~45℃
3) Operating humidity:5%~95%
4) Operating altitude:<=2000mSpecifications
specification parameter
Mode
CHR-15
Output voltage
50VDC~500VDC
Output current
33A
Input voltage
380V±15%
Input frequency
50Hz±5%
AP
12VDC
Frequency
≤0.1%
Output current accuracy
≤0.1%
Ripple voltage
≤±0.2%(MAX)
Efficiency
≥96%(Rated)
Power factor
≥0.99
Input current harmonic
≤5%
Current-unbalance
≤±3%
Protection
IP23
Communication
GB,CHAdeMO,CCS,Tesla
Noise
≤65dB
Operation Temperature
-20℃- 45℃
Working Relative Humidity
RH≤95%
Insulation Resistance
AC-GND ≥10MΩ
DC-GND ≥10MΩ
Input to output ≥10MΩ
Dielectric Voltage withstand
AC-GND 2500VAC,time:1min,Leakage Current≤10mA
DC-GND 2500VAC,time:1min,Leakage Current≤10mA
Input to output 2500VAC,time:1min,Leakage Current≤10mA
Dimension
450mm*300mm*150mm
Weight
15kg
-
750V 15KW dc ev charger module for CCS2 and CHAdeMO EV charger
15KW 750V Charger Power Module:Main Feature:*Inside high frequency transformer isolation*Full hot plug design*High efficiency over the full load range, full load efficiency higher than 95.5%*Wide output voltage range, 150-750Vdc, suitable for a wide range of EVs*Constant current for higher output power at low output voltage*An internal patented intelligent discharge circuit automatically discharges residual charge, simplifying system designs*Low standby power consumption, less than 9W*3 Phase without neutral elinates the risk of high neutral currents*3 Phase active power factor correction technology, reduces the harmonic interference to the grid* Dual DSP design, provides the full digital control, less componets means higher reliability*Wide input voltage range, 260-530Vac, allows oparation in most poor grid conditions*Wide operating temperature range, -40°C~+75°C -
4KW ev charger DC to AC V2H vehicle to home V2H chademo leaf inverter
Product Name:ev charger DC to AC V2H vehicle to home V2H chademo leaf- Production Decsrition
Pass the electricity of the Nissan car (CHAdeMO) through our V2H inverter to convert the direct current into alternating current for household use.
Note: The discharge car port is only CHAdeMO, this product is available for Nissan cars after 2014.
Discharge invertor chademo V2H soulution
Input Voltage range 200-420Vdc Power range 0-500VA(4KW) Current range(DC) 0-20A Current range(AC bypass) 0-20A Efficiency(max) 95% Protection Input OCP OCP Voltage & Frequency Window,(DC Injection TBD)(external fuse) Over Temperature 70°C at main Heatsink. Output Power derating at > 50°C temperature Isolation Monitor Device Disconnect @ < 500kD General Protection Class(isolation) Class1 Transformer design Cooling Fan cooled IP protection class IP20 Working (storage) Temp.& Humi. 20~50°C, 90% Non Condensing Dimension&WeightLifetime(MTBF) 490X438X87mm, 12kg>100,000 hours @ 25°C (Designed to meet < 0.1%/year) Safety & EMC CE Safety EN60950 Emission(Industrial) EN55011,class A (optional B) Immunity(Industrial) EN61000-4-2, EN61000-4-3,EN61000-4-4,EN6100D-4-5,EN61 ODO-4-6,EN61000-4-11 -
60KW portable mobile DC CHAdeMO CCS quick charger
Fast, mobile & flexibleMobile charging with up to 200 Km/h!The CHR-30 quick-charger was developed for electric vehicleswith CHAdeMO or ccs Cormbo DC charging sockets and is designed for semi-mobile use.It is compatible with all popularindustrial sockets and can be used with CEE63 plug sockets.The charger is flexible in use thanks to its compact dimensions and is especially suitable for use with vehicle pools,in workshops or at motoring events.Product Description
Specifications
AC input Plug type:CEE63,CEE32 Output ,Current : 61.8kw,100A Voltage : 400VAC ±10% Power factor : >0.99 at >50%load Efficiency :97% three -phase Frequency : 50/60HZ±1% DC output Plug type : CHADEMO/ GB/T /Tesla(need adapter) /CCS Type2 Output ,Current : 52.8kw,132A max@400VDC Voltage range : 200-500 VDC,250-750VDC General Specifications Weight : 42kg(not include cable) Dimensions : 500*580*240mm(excluding trolley) Housing : IP23 Cooling : Fan cooling temperature-dependent Operating temp :-60℃-+45℃ Operation: touch display+emergency stop